|
|
 |
In our pursuit to create drives optimized for variable speed needs in compact
applications, the J1000 is the solution. This micro-drive is simple
and reliable with Yaskawa quality. Demand continues to increase for compact drives with
hassle-free maintenance. Yaskawa drives have
earned a reputation for high performance, high functionality, and high quality.
Peformance Features
- Ratings:
1/8 to 3HP at 200-240 VAC 1-ph
1/8 to 5 HP at 200-240 VAC
3-ph
1/2 to 7.5 HP at 380-480 VAC 3-ph
- Overload Capacity:
150% for 1 min. (Heavy Duty)
120% for 1 min. (Normal
Duty)
- Control Method: V/f control
- DC injection braking, ramp to stop
- Electronic reversing
- Adjustable accel/decel:
0.0 to 6000 seconds
- Controlled speed range: 40:1
- Displacement power factor: 0.98
- Output frequency: 0 to 400 Hz
- Frequency resolution:
0.01 Hz with digital reference
0.06 / 60 Hz with analog
reference
- Frequency accuracy:
0.01% with digital command
0.5% with analog command
- Volts / hertz ratio: infinitely adjustable pattern
- DC Injection braking: adjustable amplitude, duration, current limited
- Torque boost: full range, auto
- Power loss ride-thru: 0.5 sec.
- Speed search
- Auto restart
- 2 Critical frequency rejection settings
- Slip compensation
Protective Features
- Current limit, stall prevention during accel, decel, and run
- Motor and drive overload
- Over voltage
- Instantaneous over current
- Short circuit
- Under voltage
- Heatsink overheat
- Ground fault protection
- Over torque
Design Features
- 16-bit microprocessor logic
- Digital keypad operator
- LED status display
- Remote Mount Keypad Capability
- 5 multifunction digital inputs
- Programmable form C output contact for customer use:
1A at 250 VAC or 30
VDC
- 24 VDC control logic compatible with sourcing or sinking outputs (PNP or
NPN)
- Carrier frequency: 15 kHz maximum; swing PWM
- 8 multi-speed settings plus jog speed
- Remote speed reference:
0-10 VDC (20 kohms) or
4-20 mA (250 ohms)
- Signal follower: bias and gain
- Analog monitor output:
0-10 VDC proportional to output frequency or output
current
- 133 parameters
- Cooling fan controlled by drive run/stop
- UL and cUL listed; CE approved
- UL recognized electronic overload
- MTBF: exceeds 28 years
- Protected chassis
- Side by side mounting
- Maintenance monitors
Service Conditions
- Ambient service temperature:
-10 to 50 °C (14 to 122 °F)
- Ambient storage temperature:
-20 to 60 °C (-4 to 140 °F)
- Humidity: to 95% non-condensing
- Altitude: to 3280 ft; higher by derating
- Service factor: 1.0
- Input voltage: -15% to +10%
200 to 240 VAC, 380 to 480 VAC
- Input frequency: +/-5%; 50/60 Hz
- Phase sequence insensitive
|
|
REV DATE: 2/16/2009
©2024 SCR Controls, Inc.
3479 Gribble Rd., Matthews, NC 28104
PO Box 2368, Indian Trail, NC 28079
email:
|
|
|
This sight is viewed best viewed with the latest versions of
Edge and Chrome. |
A. Manufactured items:
MELLTRUM (SPECTRUM REPLACEMENT) ES100A ES125A ES150A ES150ARG ES200A ES200ARG ES222 ES2300RG ES2600RG ES2700 2400-8000 2400-8001W 2450-8000W
2450-8001W 2450-8010W 2450-8015W
EDDY CURRENT CLUTCH 1235 367 FOCUS 2 FOCUS1 FOCUS 1 REPLACEMENT BOULIGNY MARK ANDY SECO BALDWIN ENKEL CUSTOM AUTOMATION SYSTEMS MULTI DRIVE SYSTEMS ERC REPLACEMENT.
|
